Try to find root folders with large inodes count:

for i in /*; do echo $i; find $i |wc -l; done

Try to find specific folders:

for i in /src/*; do echo $i; find $i |wc -l; done

OLDGW=`ip route show | grep ‘ppp0’ | sed -e ‘s/\([^ ]*\).*/\1/’ | tail -1`

find / -xdev -printf '%h\n' | sort | uniq -c | sort -k 1 -n

Reference Link: https://kudzia.eu/b/2015/10/waiting-for-tuntap-interface-to-come-up-in-openvpn-logs-under-windows-10/

sudo nano /etc/network/interfaces

up sleep 5; ethtool -s eth0 autoneg off speed 100 duplex full

OR

In Debian (also Raspberry pi) this is the way to do it as per document
/usr/share/doc/ethtool/README.Debian

iface eth0 inet dhcp
link-speed 100
link-duplex full
ethernet-autoneg off

works like a charm

Reference: https://www.raspberrypi.org/forums/viewtopic.php?f=27&t=19067

Reference http://howtoubuntu.org/how-to-repair-restore-reinstall-grub-2-with-a-ubuntu-live-cd

Terminal Commands

Mount the partition your Ubuntu Installation is on. If you are not sure which it is, launch GParted(included in the Live CD) and find out. It is usually a EXT4 Partition. Replace the XY with the drive letter, and partition number, for example: sudo mount /dev/sda1 /mnt.

sudo mount /dev/sdXY /mnt

Now bind the directories that grub needs access to to detect other operating systems, like so.

Now we jump into that using chroot.

Now install, check, and update grub.

This time you only need to add the drive letter (usually a) to replace X, for example: grub-install/dev/sda, grub-install –recheck /dev/sda.

grub-install /dev/sdXgrub-install --recheck /dev/sdX

Now grub is back, all that is left is to exit the chrooted system and unmount everything.

Shut down and turn your computer back on, and you will be met with the default Grub2 screen.

You may want to update grub or re-install burg however you like it.

Congratulations, you have just Repaired/Restored/Reinstalled Grub 2 with a Ubuntu Live CD!

curl –socks5 127.0.0.1:1080 -o /dev/null http://mirror.hk.leaseweb.net/speedtest/100mb.bin